| PPS (RYTON®): |
(Polyphenylene Sulfide) Excellent abrasion
resistance, good corrosion resistance. Use
temperature 450-500 degrees Fahrenheit.
FDA & USDA approved.
|
| NYLON: |
Excellent wear, low coefficient of friction,
fair corrosion resistance. Use
temperature 225 degrees Fahrenheit.
FDA & USDA approved.
|
PVDF (KYNAR®):
(KF POLYMER) |
(Polyvinylidene Fluoride)
Good wear and abrasion qualities,
excellent corrosion resistance. Use
temperature 250-300 degrees Fahrenheit.
FDA & USDA approved.
|
| PFA: |
(Perfluoroalkoxy) Good wear and abrasion
qualities, low coefficient of friction,
excellent corrosion resistance, excellent
release capabilities. Use
temperature 525-550 degrees Fahrenheit.
|
| PTFE (XYLAN®): |
(Polytetrafluoroethylene) Good wear resistance,
low coefficient of friction,
fair corrosion resistance.
Use temperature 450-500 degrees Fahrenheit.
|
| POLYURETHANE: |
Excellent wear and abrasion qualities,
fair corrosion resistance.
Use temperature 212 degrees Fahrenheit.
|
| EPOXY: |
Good wear and abrasion qualities,
good corrosion resistance.
Use temperature 250 degrees Fahrenheit.
|
| ETFE: |
(Ethylene-tetrafluoroethylene)
Excellent wear and abrasion qualities,
low coefficient of friction,
excellent corrosion resistance,
excellent electrical properties.
Use temperature 350 degrees Fahrenheit.
|
| ECTFE (HALAR): |
(Ethylene-chlorotrifluorodethylene)
Excellent wear and abrasion qualities,
low coefficient of friction,
excellent corrosion resistance,
excellent release characteristics.
Use temperature 300-325 degrees Fahrenheit.
|
| HERESITE PHENOLIC: |
Good chemical properties,
excellent over the spectrum of H2SO4,
ideal finned tube heat exchanger coating.
Use temperature 400 degrees Fahrenheit.
|
| FEP: |
(Fluoroinated Ethylene Propylene)
Good wear and abrasion qualities,
low coefficient of friction,
excellent corrosion resistance,
excellent release characteristics.
Use temperature 400 degrees Fahrenheit.
|
